SunStat Sub Control Relay for extending your system beyond 15 amps

Product Information

The SunTouch 500680 SunStat Relay is designed to control the voltage to either a 120VAC or 240VAC resistive floor warming system. It must be driven by a SunStat thermostat to operate, 500670 (programmable) or 500675 (non programmable). The 500680 Replaces the CT230-xxx SlaveStat models.

The Sunstat Relay allows you to expand an existing or new installation of Suntouch Floor Heating; you may drive up to 10 SunStat Relays with one SunStat thermostat acting as the Master control of all attached relays (up to 10). This allows 1 thermostat to control up to 10 circuits of floor warming.

This Relay is Dual Voltage for either 120v or 240v - You can't get it wrong! Power and floor heating is connected to each relay (just like a thermostat) and then low voltage wire connects each relay to the Thermostat.

When you use the Sunstat Relay with the NEW Programmable SunStat PRO control, these New Features provide the Ulitmate heated floor control.

• Dual Voltage - 1 thermostat for Either 120v or 240 - never have the wrong thermostat on the job again.
• Air-sensing Mode with a Floor Temperature override limit as an option
• Regulator mode if sensor not connect or is damaged
• "Master" Control Capability - Each SunStat Pro allows other SunStat Relays to be connected to it to expand your system
• Class 2 Insulated Sensor ( 15' long) Wire which can run in the SAME CONDUIT as the power lead from your Floor Heater system
• 5/1/1 Day Programming mode or manual option
• Four Preset Schedules are included - choose one that suits you or program your own!
• Usage Monitoring - Your SunTouch SunStat Pro can report the on time of your SunTouch Floor Heat system
• 12 or 24 hour (military time) Display - your choice
• SmartStat Technology
• Easily Integrates with your home automation system (dry contact relay)

Other Features of the 500680 Relay when used with the 500670 SunStat Pro:

• Temperature Range (floor) of 40 to 99 degrees F (5 to 37 Celsius)
• Large Digital Display showing operation, mode, heat on/off, etc. LCD shows time and all functions
• Temperature displays in either F or C
• 15 Amp capacity to control up to 150 SF of SunTouch 120VAC mats per control and 300 SF of 240v SunTouch
• Can connect to NEW remote FloorStat sub control relay 500680
• Built-In Class A GFCI protection with GFCI test Light and button - 5 milliAmp trip
• 2 Year Warranty
• No Battery required - Your programming is saved in memory indefinitely
• Manual Setback / Vacation Mode for quick switching to Economy setting when leaving for an extended time
• MANUAL mode is also available to over-ride your program. Many customers like the look of this programmable model, but use it as a manual control

Included with Each SunStat Relay:

• Small Screwdriver for making connection
• Wirenuts for wiring connections
• Mounting Screws

Features and Specs Information:

WarmWire = Zero EMF

An emerging issue in the electric radiant heat industry is EMF (electromagnetic field) radiation. SunTouch pioneered and sells only ZERO EMF products constructed with active dual wire EMF-canceling technology.

All WarmWire products use a complex wire construction with two heating elements in parallel with an added and patented helical twist to eliminate EMF. Other electric radiant floor heating companies sell single-wire systems that release high levels of EMF when compared to WarmWire.

What is EMF? Electromagnetic fields (EMF) come from all electrical appliances, but studies show an average American's daily exposure is less than 1 unit (mG) of EMF. But. when you sit on an unshielded electric radiant floor, you may be exposed to 20, 40, or more times the average daily exposure. This Data comes from Independent testing. Read More Here

Is limiting exposure to EMF important? No one is certain. The World Health Organization says the data is inconclusive to date, but continues their research. We provide this EMF information because it is important to some people, not to frighten you or exaggerate any risk.

For many years customers have chosen WarmWire Zero EMF systems, but we leave the choice to you after explaining what we do know.

Shipping Information

For Orders $149 and Over standard ground shipping is Free.

1. Place at least $149 of eligible products in your Cart & proceed to checkout
2. Ship your items to a single U.S. address (Free to lower 48 states Not Free to Alaska & Hawaii)
3. Select Free Shipping or the shipping method that displays with price $0.00 as your shipping Method. We usually ship via UPS ground, but we select the method & may use another carrier for Items shipped Free.
4. Review your cart to verify your shipping cost is $0.00, Place your order, and enjoy the free shipping!
5. After your order ships, you will receive tracking via Email & it will be delivered within 1-5 business days.

Will it ship today? 99%+ of orders ship the SAME DAY you order, if you order before 7 PM Eastern Time. We Have It, We Ship It. We are not like others who have little or no stock or have a much earlier shipping cut-off time.

In addition to our FREE SHIPPING promotion, we offer several expedited shipping options at added cost.

Read Complete Shipping terms here - Shipping Terms

Additional Information

• Installation Video
• Troubleshooting Your Installation
• SunTouch FAQ, Instructions, & more Info