The SunTouch 500680 SunStat Relay is designed to control the voltage to either a 120VAC or 240VAC resistive floor warming system. It must be driven by a SunStat thermostat to operate, 500670 (programmable) or 500675 (non programmable). The 500680 Replaces the CT230-xxx SlaveStat models.

The Sunstat Relay allows you to expand an exisitng or new installation of Suntouch Floor Heating; you may drive up to 10 SunStat Relays with one SunStat thermostat acting as the Master control of all attached relays (up to 10). This allows 1 thermostat to control up to 10 circuits of floor warming.

This Relay is Dual Voltage for either 120v or 240v - You can't get it wrong! Power and floor heating is connected to each relay (just like a thermostat) and then low voltage wire connects each relay to the Thermostat.

When you use the Sunstat Relay with the NEW Programmable SunStat PRO control, these New Features provide the Ulitmate heated floor control

• Dual Voltage - 1 thermostat for Either 120v or 240 - never have the wrong thermostat on the job again.
• Air-sensing Mode with a Floor Temperature override limit as an option
• Regulator mode if sensor not connect or is damaged
• "Master" Control Capability - Each SunStat Pro allows other SunStat Relays to be connected to it to expand your system
• Class 2 Insulated Sensor ( 15' long) Wire which can run in the SAME CONDUIT as the power lead from your Floor Heater system
• 5/1/1 Day Programming mode or manual option
• Four Preset Schedules are included - choose one that suits you or program your own!
• Usage Monitoring - Your SunTouch SunStat Pro can report the on time of your SunTouch Floor Heat system
• 12 or 24 hour (military time) Display - your choice
• SmartStat Technology
• Easily Integrates with your home automation system (dry contact relay)

Other Features of the 500680 Relay when used with the 500670 SunStat Pro:

• Temperature Range (floor) of 40 to 99 degrees F (5 to 37 Celsius)
• Large Digital Display showing operation, mode, heat on/off, etc. LCD shows time and all functions
• Temperature displays in either F or C
• 15 Amp capacity to control up to 150 SF of SunTouch 120VAC mats per control and 300 SF of 240v SunTouch
• Can connect to NEW remote FloorStat sub control relay 500680
• Built-In Class A GFCI protection with GFCI test Light and button - 5 milliAmp trip
• 1 Year Warranty
• No Battery required - Your programming is saved in memory indefinitely
• Manual Setback / Vacation Mode for quick switching to Economy setting when leaving for an extended time
• MANUAL mode is also available to over-ride your program. Many customers like the look of this programmable model, but use it as a manual control

Included with Each SunStat Relay:

• Small Screwdriver for making connection
• Wirenuts for wiring connections
• Mounting Screws

Additional Information

500680 Instructions PDF Print, Read or save

The SunTouch LoudMouth Monitor sounds an alarm if the SunTouch Heating Wire is cut or damaged, allowing for easy repair BEFORE the mat is covered with Mortar & Tile. We highly recommend the LoudMouth® invented and patented by SunTouch.

Connect it during the ENTIRE installation of your SunTouch Mats to monitor the Heating Elements and give yourself the assurance of a Quality Installation. The LoudMouth Monitor is Another SunTouch innovation - Our design is unique and has more features than recent imitators.

How the LoudMouth Works:

1. Insert each lead wire from the heating product into L1 and L2 terminals (no polarity) with the ground wire inserted into the G terminal. Tighten the terminal screws onto the wires.
2. Set switch to ON position.
3. Green light indicates the LoudMouth is operating.
4. The red light and alarm indicate lead wires have come loose from terminals or damage has occurred to the heating product.
5. Press the TEST button to simulate a damage condition before beginning work.

Of course, you can also monitor the installation with only your digital multi-meter to verify resistance (ohms); but you will have to watch it throughout the installation process. The Loudmouth is nicknamed "The Screamer" and is optional, but provides peace of mind during the installation process or between the installation of the Mats and the Tile (if there is a time gap between when the mats are laid out unprotected and covering them with mortar).

LoudMouth Monitor Features:

1. A very Loud Alarm Simple operation with an On/Off Switch and a TEST button
2. 9V battery operated (included)
3. A green light to indicate GO and a Red light to indicate STOP, there's damage - Fix it now
4. Screwdriver included for attaching mat leads 1 LoudMouth can be used to monitor up to 3 mats at once

** Important - a Multi Meter to measure OHMS is still required to test resistance before, during, and after installation. The Loudmouth DOES NOT replace the use of an Ohm meter - it's just another SunTouch Innovation to help your installation go smoothly.

Additional Information

How-To Connect the LoudMouth

The SunTouch 500670 Programmable Floor Heating Thermostat's NEW clean design makes it the Ultimate choice for control of your Floor heating system. This thermostat senses the FLOOR Temperature (Using the INCLUDED 15 foot Floor Sensor Wire) and has Built-in Ground Fault Protection for your safety and is listed by ETL to UL standards for use in the USA and Canada. No need for an additional GFCI circuit in most areas. Programming buttons are out of sight behind a single door at the bottom of the SunStat Pro, just below the backlit digital display.

>>> New lower special Price for a Limited Time ! <<<

This Thermostat is Dual Voltage - 1 thermostat for either 120v or 240v - You can't get it wrong!

Several New Features were added when creating this thermostat, which was released in Aug 2007 and is Manufactured by SunTouch - not outsourced like other manufacturers.

New Features make the SunStat Pro the most versatile Programmable Thermostat in the Floor Heating market today:

• Dual Voltage - 1 thermostat for Either 120v or 240 - never have the wrong thermostat on the job again
• Air-sensing Mode with a Floor Temperature override limit as an option
• Regulator mode if sensor not connect or is damaged
• "Master" Control Capability - Each SunStat Pro allows other SunStat Relays to be connected to it to expand your system
• Class 2 Insulated Sensor ( 15' long) Wire which can run in the SAME CONDUIT as the power lead from your Floor Heater system
• 5/1/1 Day Programming mode or manual option
• Four Preset Schedules are included - choose one that suits you or program your own!
• Usage Monitoring - Your SunTouch SunStat Pro can report the on time of your SunTouch Floor Heat system
• 12 or 24 hour (military time) Display - your choice
• SmartStat Technology
• Easily Integrates with your home automation system (dry contact relay)

Other Features:

• Temperature Range (floor) of 40 to 99 degrees F (5 to 37 Celsius)
• Large Digital Display showing operation, mode, heat on/off, etc. LCD shows time and all functions
• Temperature displays in either F or C
• 15 Amp capacity to control up to 150 SF of SunTouch 120VAC mats per control and 300 SF of 240v SunTouch
• Can connect to NEW remote FloorStat sub control relay 500680
• Built-In Class A GFCI protection with GFCI test Light and button - 5 milliAmp trip
• 1 Year Warranty
• No Battery required - Your programming is saved in memory indefinitely
• Manual Setback / Vacation Mode for quick switching to Economy setting when leaving for an extended time
• MANUAL mode is also available to over-ride your program. Many customers like the look of this programmable model, but use it as a manual control

Included with Each Thermostat:

• 15 Foot Sensor Wire
• Complete Instructions in English, Spanish & French
• Screwdriver included for use in installation
• Wire Nuts
• Mounting Screws

Additional Information

500670 Instructions PDF Print, Read or save

Our Digital Multi-Meter is used to check resistance (ohms ) of Electric Floor Heating elements before, during, and after installation, as required by the installation manual.

ALL Electric Floor Heat installations REQUIRE the use of a digital ohm meter (aka multi meter - must be digital). You do not have to buy this meter - you just need to have one on the job; borrow one if you can.

Dial your meter to " 200 " in the green ? range to test heating elements and " 20K " or 20,000 to check the sensor wire. Get accurate readings for:

• Resistance - this is what you need for Floor Heating Installations
• DC Voltage
• AC Voltage
• Transistor Test
• Diode Test
• 19 Different Measuring Ranges

Our Compact Meter is 3-3/4" x 1-3/4" x 7/8" to easily fit in your pocket or tool box. Features an easy-to-read 1-1/2 inch digital LCD readout, positive set selector switch, and dual 24" leads. Low battery indication (12v Battery is included & Installed). Fuse (replaceable) protected circuit. Here is the scientific mumbo jumbo: DC-A: 0-200 A-2000 A-20mA-200mA. Resistance:0-200-2000-20K-200K-2000K ohm. DC-V: 0-200mV-2000mV-20V-200V-500V. AC-V: 0-200-500V

We buy these in large quantity so we can offer them to you at this GREAT PRICE. Great to keep around the house for the Do-It-Yourselfer after Installation of your floor warming system. Additional Information

Additional Information DVM810 Instructions

Warm Your Floor is pleased to introduce the first non metallic trowel specifically designed for use with electric radiant floor heating systems in North America.

The Suntouch Cable Trowel has been thoughly tested by professional tile installers. The Results are in!

About the Suntouch  CableTrowel :

• This new tool works faster
• The CableTrowel is easier to clean than other trowels
• And it cannot damage the heating wire.

Experienced tile installers know that metal trowels can become razor sharp over time and those edges are a danger to electric heating cables. The CableTrowel blade is made of durable ABS plastic so it is safer to use around heating elements.

The NEW Suntouch CableTrowel is lightweight, but tough enough for commercial use. The CableTrowel is a commercial quality non-metallic trowel that WILL NOT damage the heating wire

Make your electric radiant installation faster and easier - try the CableTrowel!

• The CableTrowel Will NOT damage the electric radiant heating wire or your hands! No sharp edges means no cuts in wire or you!
• The CableTrowel has a 3/8 x 3/8 notch size is suitable for larger tiles.
• It is Lighter and easier to use than the typical trowel
• Quick Clean up since mortar washes off easily and the CableTrowel will never rust.

All these features and it costs less than !

Complete Repair Kit- includes all parts & complete instructions for 1 SunTouch Heating Wire repair.

Kit Includes:

• Solder Melt Splice connectors
• Small lengths of wire
• All components needed for a repair to 1 break in the Heating Wire.

1 kit needed for each repair.

This Kit is for SUNTOUCH manufactured products only. You can use this same repair kit for SunTouch Mats and WarmWire.

You will need:

A few basic tools to perform a repair - see instructions for details.

Additional Information

See Repair Instructions